Attention all Apple TV jailbreakers, FireCore has just released a new version of its popular jailbreaking utility known as Seas0nPass. The software is the ATV equivalent of an app like Absinthe.

In the latest update, which brings Seas0nPass to version 0.8.2, FireC0re has added in a new stitching feature which makes downgrading to previous firmware versions possible…(…)
Read the rest of FireCore updates Seas0nPass with firmware stitching

“FireCore updates Seas0nPass with firmware stitching” is an article by iDownloadBlog.com.
Make sure to follow us on Twitter, Facebook, and Google+.

Last night, it was announced that the iPhone 4S will be available on China’s second-largest carrier, China Telecom, on March 9th. Apple has been aggressively attacking China and has been reaping off its benefits. To benefit iPhone sales even more, Apple is continuing to pursue adding more carriers to support the iPhone in China.

Reuters reports China’s largest carrier, China Mobile, has been “aggressively negotiating” a deal with Apple, but some technical hurdles are holding back a launch for now…(…)
Read the rest of Apple and China Mobile negotiating iPhone deal

“Apple and China Mobile negotiating iPhone deal” is an article by iDownloadBlog.com.
Make sure to follow us on Twitter, Facebook, and Google+.

People went into quite the stir, after WSJ published an article reporting that Google had been overriding Safari’s privacy settings to track user’s web browsing habits. Google used many forms of trickery to bypass Apple’s security settings, on both the desktop and iOS versions of Safari. Many users are questioning Google’s tactics.

The whole ordeal is now entering court, as Business Week reports that an Illinois man is suing Google Inc. in a Delaware court…(…)
Read the rest of Man sues Google for overriding Safari users’ privacy

“Man sues Google for overriding Safari users’ privacy” is an article by iDownloadBlog.com.
Make sure to follow us on Twitter, Facebook, and Google+.

Pepper spray is one of the best tools for self defense when being mugged, or worse, by a criminal. However, it’s one of those things that you won’t always have on you, especially if you’re not a female who carries a purse.

Luckily, Swiss manufacturer Piexon has developed the new Smartguard case for the iPhone 4/4S that combines a can of pepper spray right on an iPhone case, leaving it always at your disposal…(…)
Read the rest of Use your iPhone for self defense with this pepper spray case

“Use your iPhone for self defense with this pepper spray case” is an article by iDownloadBlog.com.
Make sure to follow us on Twitter, Facebook, and Google+.

Skype is one of the best tools to communicate with friends, family, and colleagues. It allows you to easily send messages and call people for free. Skype’s iOS app also makes it even easier to communicate on the go.

Today, the Skype crew has released a welcomed update for their iOS app, that includes a new interface and a slew of bug fixes, in version 3.7:(…)
Read the rest of Skype for iOS updated with new interface and bug fixes

“Skype for iOS updated with new interface and bug fixes” is an article by iDownloadBlog.com.
Make sure to follow us on Twitter, Facebook, and Google+.

Simply HDR has the potential of turning your ordinary photos into extraordinary ones. HDR photography has turned into an art form itself, and Simply HDR does a great job of creating these types of images with very little work from the user.

Most HDR apps require you to take at least two photos, each exposed differently, to be combined into a single image. Simply HDR aims to make the process, well, simpler, by performing the edits on just one photo. This is great for those times when you’re browsing through your Camera Roll and realize that a photo you took the other day might look nice with some HDR processing.

After opening the photo you’d like to edit, you can choose from five different styles: High Dynamic Range, Black and White HDR, Contrasted HDR, Shadows and Lights, and Contrasted Light — each of which has 9-15 different “filters” to choose from. Then you can adjust shadow and highlight corrections, vignette settings, grain strength, and add a tint.

Many people like the over-processed look that HDR photos can achieve, so if that’s what you’re looking for, Simply HDR does it well. Personally, I prefer subtle, natural-looking HDR processing. Lucky for me, Simply HDR has some options that fit my taste as well. The photo above is one such example.

If you pick this one up, we would love it if you shared your images with us in the iMore Photography Forum!

$0.99 for iPhone – Download Now

$1.99 for iPad – Download Now

“Checking for water damage is pretty simple and something everyone should do before forking over your hard earned cash for a second-hand iPhone 4.”

If you’re trying to save some money and are in the market to purchase a used iPhone 4 from either Craigslist, eBay, or some other local or online seller, one of the first things you’ll want to do is check for any signs of water damage. I see several people in my office each week that purchased used iPhones that mysteriously quit working after a few days. As much as we’d like to believe there aren’t people out there who would sell us broken or water damaged devices, it happens every day.

While online-only iPhone purchases are convenient, I highly recommend meeting up with someone locally, for example, someone off of Craiglist, before turning to eBay or any other online broker. This allows you inspect the iPhone device before you actually commit to purchasing it, and gives you a chance test it out and check for water damage yourself.

If you can’t meet someone locally and need to buy online, request that the seller inspect for water damage and send you images that allow you to see that the water sensors are still intact and that the internals have not suffered any damage or corrosion.

Apple has placed 4 sensors inside the iPhone 4 that make it pretty easy to tell if any part of the device has come in contact with liquid. These sensors are placed exactly the same in the GSM iPhone 4 and CDMA iPhone 4. You want to make sure the sensors are white as opposed to red. If you see a sensor that has turned red, that’s a sign it’s come into contact with liquid or heavy humidity.

How to check external iPhone water sensors

The easiest thing to check are the two sensors you can see without removing the back of the iPhone 4. I recommend bringing a small pocket or keychain flashlight with you in order to get a good look at the sensors.

Headphone jack sensor

The easiest sensor to check in an iPhone 4 for water damage is the one at the bottom of the headphone jack

Your first sensor is located inside the headphone jack at the bottom. It’s the easiest sensor to find and inspect. Shine a flashlight into it and make sure you don’t see anything but white. (Red is bad.)

As a side note, this sensor can come out or become dislodged occasionally. If you don’t see one, just move on and check the next sensor. I wouldn’t take it as a sign that the seller is trying to be dishonest (yet).

Dock connector sensor

The white part I've emphasized in the image is where you'll want to look for the water sensor in the dock connector

The next sensor is a square sensor in the dock connector. To see it, hold the phone screen down in your hand and look inside the dock connector towards the middle. On the upper side you will see a tiny white square (or red square if the device has come into contact with liquid). Make sure this one is white.

If both sensors are white, it may not be necessary to proceed any further. The device most likely has never been subjected to water damage. If the headphone jack sensor was missing or you couldn’t find one of the sensors, you may want to continue to the next section.

How to checking internal iPhone water sensors

It may seem silly to bring a screwdriver with you to check out an iPhone but it’ll seem a lot less silly when it saves the lost money and headache you’d get for buying a water damaged iPhone 4.

There are two sensors on the inside of the iPhone 4 that are easily visible once the back is removed. You can pick up a security screw driver online and a #00 Phillips screwdriver from your local hardware store for a few bucks. You’ll need one of the two in order to remove the back.

If you’re buying a CDMA iPhone 4 off of someone, you’ll most certainly need the security screwdriver. Older GSM models still have standard #00 screws while newer ones have security screws. Remove the 2 screws holding the back plate on and gently push the back up and pull it off. This will give you a clear view of the last 2 sensors and a lot of the internals of the device.

While you’re checking the last 2 sensors it’s always a good idea to look closely at the internals and make sure everything looks ok. You’ll want to avoid any devices that show signs of the following:

• Obvious corrosion
• Torn cables
• Missing screws
• The battery tab is torn off
• A large amount of debris or dust inside the device

If all those seem good, you’ll just need to make sure the water sensors check out okay.

Battery sensor

Check the sensor directly above the battery to make sure it hasn't turned red

The first sensor is placed directly over the clip that holds the battery down. Again, just make sure it’s white and move on the to next and final sensor. If it isn’t white but all the rest are, I’d probably still advise against buying the device as the battery or other internal parts could have come into contact with liquid at some point.

Logic board sensor

Never purchase a used iPhone 4 if the sensor over the screw holding down the logic board has turned red

The final sensor is located on a screw holding the logic board in place. If this sensor is white, you’re in the clear. If it’s not, you’ll definitely want to stay away from purchasing the device. This sensor is the closest one to the logic board. If it’s red, odds are the logic board has liquid damage and will eventually go out.

Wrap up

Checking for water damage is pretty simple and something everyone should do before forking over your hard earned cash for a second-hand iPhone 4. I would personally consider buying an iPhone 4 if only the headphone jack or dock connector sensor was triggered. If the rest of the device is in perfect condition and the inside has no sensors triggered, I’d say you’re okay. A lot of things including living in a humid climate can cause external sensors to be triggered. Apple will actually honor a warranty swap if only one external sensor is triggered due to these factors.

Just make sure if one external sensor is triggered or missing that you check the inside ones. As long as those are okay, the decision really lies with how comfortable you feel and how honest you think the seller is. If they seem irritated or worried about you checking out the device, find another one.

Interested in other DIY, repair, and modding info? Check out the resources below or if you ever decide certain repairs are beyond your skill level, contact PXLFIX regarding mail-in repairs and pricing.

Additional resources

• How to choose quality iPhone 4 color kits
• All DIY, repair, and mod guides
• Mod and DIY repair forums

Barcode Scanner is exactly what you need to easily find and enter PointsPlus values, and a great companion app to Weight Watchers Mobile for iPhone

If you’re a Weight Watchers subscriber using Weight Watchers Mobile for iPhone, Weight Watchers Barcode Scanner is a great companion app for quickly calculating points values. Manually typing in fat, carbs, fiber, and protein can be a daunting task especially when grocery shopping. The barcode scanner app makes the task super simple and easier than ever, and is a great way to avoid impulse junk food purchases.

The biggest hurdle I’ve had to face since starting back up with Weight Watchers is grocery shopping. I’ve stuck with buying healthy foods but it can be a task to manually enter in the contents in order to decide whether or not a food I want is a healthy decision.

Once you've sign in you can start scanning and managing foods and point values quickly and easily

The Weight Watches Barcode Scanner helps cut the time I spend looking for healthy foods in half while shopping. If you’ve used any type of QR code scanner on your iPhone you’ll be right at home.

The first time you launch the app you’ll be asked to sign into your Weight Watchers account. (You can choose for it to remember you in the Settings tab). Weight Watchers Barcode Scanner will load the scanner by default on launch. Then all you do is simply align a bar code and it scans away. It’ll read it and tell you the PointsPlus value for a single serving. If it can’t find an item, it’ll allow you to manually enter in carbs, fat, fiber, and protein into the points calculator.

Quickly scan an item to see the PointsPlus value in seconds. If the app can't find a value, it'll allow you to manually enter nutrition information.

If the app doesn’t know the serving size it will simply say unknown. I’ve found most of the time that it calculates a points value but says unknown serving size, it’s on items that are off-brand or measured in cups. You’ll just need to follow the serving size on the box. If you can’t get a good view of the bar code with the scanner, you can also choose to enter it in manually.

Quickly add scanned items directly to your favorites or tracker in a few quick taps. No need to jump into another application.

Weight Watchers Barcode Scanner will also keep track of all the foods you’ve scanned under the Lists tab. Not only can you view the items you’ve added, you can add them to your favorites or your tracker directly from the application. Since Weight Watchers stores all your information online, you’ll see the information added to your tracker via Weight Watchers Mobile as well next time you launch it.

There are a few apps in the app store that spit out Weight Watchers point values. I’ve found this one to be the best simply because it ties directly into your online tracker and integrates nicely as a companion app to the full Weight Watchers Mobile app. I don’t have to jump out of whatever I’m using to scan bar codes and into Weight Watchers mobile and re-enter information. I just add the item I want directly to my tracker from Barcode Scanner and it’s already there.

The good

• It makes grocery shopping for healthier foods less of a task and not so overwhelming
• Gives the option to add directly to your favorites and tracker which eliminates having to jump into another app
• The overall UI is very similar to the Weight Watchers Mobile app so you’ll feel right at home

The bad

• You’ll need a Weight Watchers subscription to utilize the application which may not be an option for some users as the cost may be more than they’re willing to pay
• You won’t always find bar codes for many off brands
• No auto-focus can be annoying at times when the app doesn’t automatically center in on the bar code

Conclusion

If you’re looking for an easier way to find PointsPlus values than typing in numbers each time, BWeight Watchers Barcode Scanner is exactly what you’re looking for and a great companion app to Weight Watchers Mobile for iPhone. While there are competitors out there, they just can’t provide the tight integration into the Weight Watchers system that the official app can.

The fact that I can add things directly to my tracker and favorite items while I shop without jumping into multiple other apps makes it a hands down winner.

If Weight Watchers is your diet plan of choice, let us know your experiences in our Health and Fitness Forum and check out what the rest of our staff is picking to get healthier during Mobile Nations Fitness Month.

Weight Watchers Barcode Scanner is free to download but you’ll need a Weight Watchers subscription in order to log in and start using it.

Free – Download now

We’ve seen a number of supposed iPad 3 parts recently, and this latest one shows the front glass and digitizer assembly with the layout remaining largely the same as that of the iPad 2, with no changes to the Home button, front-facing camera position or ambient light sensor arrangement. If the pictures, which come by way of Sina Weibo, are accurate, the only recognizable change is the ribbon cable on the side of the glass, which extends roughly half-way up the device as opposed to the iPad 2 which has a shorter cable with a sideways orientation.

A separate post from the same person claims the rumored A5X SoC includes a dual-core processor instead of quad-core, in addition to the iPad 3 coming with full support for Siri, which has so far remained exclusive to the iPhone 4S.

Other recent component leaks indicate a thicker, more tapered back, a logic board with possible A5X chipset and the supposed Retina display put under a microscope.

Additional notes indicate Apple plans to release iOS 5.1 alongside the iPad 3, which is expected to be announced on March 7th with a Retina display and possible 4G LTE. BGR previously heard rumors of iOS 5.1 hitting on March 9th, which could be when Apple plans to deliver devices to consumers, but we’ll have to wait for the official announcement next month.

Source: Sina Weibo via Apple.pro, MacRumors

With working conditions in Chinese factories still making headlines, Apple manufacturer Foxconn is going to be increasing wages, and Apple is reportedly going to allow independent environmental reviews of at least 2 of their suppliers, with the potential for more to follow. USA Today:

Ma Jun, founder of the Institute of Public & Environmental Affairs, told USA TODAY in a phone interview Monday that Apple agreed to the independent reviews in late January in response to two reports that IPE and other environmental groups released last year documenting hazardous-waste leaks and the use of toxic chemicals at suspected Apple suppliers. [...] An independent review is necessary to “make sure that (it) is done in a transparent way,” said Ma, whose group has had half a dozen meetings and calls with Apple since mid-September.

Because of Apple’s size and success, activists are looking to Apple to lead the way and set the standard for responsible manufacturing in China.

Foxconn, one of Apple’s principle suppliers and the subject of intense media attention over the last couple of years, has also said they’ll be increasing workers’ wages, and reducing overtime demands. The New York Times reports:

Foxconn said that salaries for many workers would immediately jump by 16 to 25 percent, to about $400 a month, before overtime.

Foxconn also manufactures products for Dell, HP, and others.

All this follows inspections by the Fair Labor Association and a tour by ABC News Nightline.

Source: USA Today, New York Times